MCNOs/CdS双效光催化剂的制备及其性能研究

水热合成法制备了不同磁性纳米洋葱碳(MCNOs)负载量(0%、1%、3%、5%)的MCNOs/CdS光催化剂。并通过X射线衍射分析(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)、紫外可见光光谱(UV-Vis)、磁滞回线测定仪(VSM)对其进行表征,探究了MCNOs负载比例对催化剂在可见光下降解RhB性能及机理的影响。结果表明,MCNOs能有效提高CdS的光催化效果,复合3%MCNOs后降解率为96%,与纯CdS相比降解率提高了30%,磁性分析表明,其具有良好的顺磁性并能实现催化剂的有效回收。MCNOs/CdS在可见光下催化降解RhB的一级反应动力学直线有较好的拟合度,表明制备的催化剂有较好的催化活性。     

The Evolution of Quantum Discord and Entanglement in the XXZ Heisenberg Spin Chain under Ornstein-Uhlenbeck Noise

International Journal of Theoretical Physics - The dynamics of entanglement measured by concurrence and quantum correlation described by quantum discord under Ornstein-Uhlenbeck noise are...     

Majorana Representation for a Composite System

International Journal of Theoretical Physics - The Majorana representation, which provides an intuitive way to represent the quantum state by stars on the Bloch sphere, has drawn considerable...     

ON THE EXISTENCE WITH EXPONENTIAL DECAY AND THE BLOW-UP OF SOLUTIONS FOR COUPLED SYSTEMS OF SEMI-LINEAR CORNER-DEGENERATE PARABOLIC EQUATIONS WITH SINGULAR POTENTIALS

In this article,we study the initial boundary value problem of coupled semi-linear degenerate parabolic equations with a singular potential term on manifolds with corner singularities.Firstly,we introduce the corner type weighted p-Sobolev spaces and the weighted corner type Sobolev inequality,the Poincare′inequality,and the Hardy inequality.Then,by using the potential well method and the inequality mentioned above,we obtain an existence theorem of global solutions with exponential decay and show the blow-up in finite time of solutions for both cases with low initial energy and critical initial energy.Significantly,the relation between the above two phenomena is derived as a sharp condition.Moreover,we show that the global existence also holds for the case of a potential well family.     

Semiconvergence analysis of the randomized row iterative method and its extended variants

The row iterative method is popular in solving the large‐scale ill‐posed problems due to its simplicity and efficiency. In this work we consider the randomized row iterative (RRI) method to tackle this issue. First, we present the semiconvergence analysis of RRI method for the overdetermined and inconsistent system, and derive upper bounds for the noise error propagation in the iteration vectors. To achieve a least squares solution, we then propose an extended version of the RRI (ERRI) method, which in fact can converge in expectation to the solution of the overdetermined or underdetermined, consistent or inconsistent systems. Finally, some numerical examples are given to demonstrate the convergence behaviors of the RRI and ERRI methods for these types of linear system.     

Enhancement of uranium(VI) biomineralization by Saccharomyces cerevisiae through addition of inorganic phosphorus

Journal of Radioanalytical and Nuclear Chemistry - Enhancement of U(VI) biomineralization by Saccharomyces cerevisiae through addition of inorganic phosphorus was studied in this work. The addition...     

Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

Evaluation of green and efficient deep eutectic solvents as media for extracting alkaloids from lotus leaf

Deep eutectic solvents (DESs) were applied as eco-friendly solvents in this study for the extraction of alkaloids from lotus leaf, including O-nornuciferine, N-nornuciferine, nuciferine and roemerine. A series of hydrophilic and hydrophobic DESs with different hydrogen bond donors and a acceptors were synthesized and screened for a suitable DESs for extraction of alkaloids from lotus leaf. The study results showed that the hydrophilic DES with choline chloride and propanediol had the highest extraction yield. The main factors affecting the extraction efficiency—choline chloride–propanediol ratio, water content in deep eutectic solvents, solid–liquid ratio and extraction time—were investigated via a single-factor experiment. The optimized extraction conditions were 30% of water in choline chloride–propanediol (1:4) for heated extraction for 30 min and solid–liquid ratio 1:100 g/ml. Under optimum conditions, the extraction yields of O-nornuciferine, N-nornuciferine, nuciferine and roemerine were 0.069, 0.152, 0.334 and 0.041 g/100 g respectively, which were higher than those of methanol in acidified aqueous solution. This study suggests considerable potential for DESs as promising materials for the green and efficient extraction solvents for bioactive alkaloids from natural sources.     

Y掺杂WS2二维材料的第一性原理研究

WS₂由于其优异的物理和光电性质引起了广泛关注。本研究基于第一性原理计算方法,探索了本征单层WS₂及不同浓度W原子替位钇(Y)掺杂WS₂的电子结构和光学特性。结果表明本征单层WS₂为带隙1.814 eV的直接带隙半导体。进行4%浓度(原子数分数)的Y原子掺杂后,带隙减小为1.508 eV,依旧保持着直接带隙的特性,随着Y掺杂浓度的不断增大,掺杂WS₂带隙进一步减小,当浓度达到25%时,能带结构转变为0.658 eV的间接带隙,WS₂表现出磁性。适量浓度的掺杂可以提高材料的导电性能,且掺杂浓度增大时,体系依旧保持着透明性并且在红外光和可见光区对光子的吸收能力、材料的介电性能都有着显著提高。本文为WS₂二维材料相关光电器件的研究提供了理论依据。     

多孔离子液体的构筑及应用

多孔液体(Porous Liquids, PLs)是一类结合了多孔固体永久性孔隙与液态流动性优势的新材料. 自2007年, PLs的概念被首次提出以来, 其在合成策略与应用领域方面均取得了较大的突破. 然而, 传统的PLs因高黏度、高密度、高熔点与高原材料成本等缺陷极大程度制约了其在流动工业系统中的大规模应用. 因此, 迫切需要寻求理想的位阻溶剂用于制备先进的多孔液体. 离子液体(Ionic Liquids, ILs)因独特的可调节物理特性、非挥发性、高稳定性、易获得、经济性高、低再生能耗等特性, 使其成为构筑PLs中最具有应用前景的理想溶剂之一. 在过去的5年间, 基于多种ILs与先进多孔固体(如有机笼、金属有机框架、中空碳、沸石、多孔聚合物等)制备的多孔离子液体(Porous Ionic Liquids, PILs)被陆续报道. PILs独特的永久性孔隙、无溶剂挥发、再生能力强、黏度可调、低熔点、高稳定性等特性加快了其在气体吸附、分离、催化、萃取、分子分离等领域的快速发展. 本综述围绕PILs的构筑策略、特性、应用领域等阐述了其研究进展. 最后, 对PILs在制备中存在的挑战与未来的研究方向进行了归纳与展望.